Dayco 78879GL Air Intake Hose

Dayco 78879GL Air Intake Hose Reviews

Other Picture

Dayco 78879GL

Visit Store Now !!

Detail Products

Detail Reviews

Aug 01, 2011 00:31:04

Mintcraft HCRAN56 Hose Clamp 3-1/16-4" (PACK OF 10)

Mintcraft HCRAN56 Hose Clamp 3-1/16-4" (PACK OF 10) Reviews

Other Picture

Mintcraft HCRAN56 Hose Clamp 3-1/16-4" (PACK OF 10) Feature

• "MINTCRAFT" HOSE CLAMP (PACK OF 10)
• 1-piece stainless steel housing and band in precision engineered
• Interlocked construction.
• Stainless steel
• Carbon steel screws

"MINTCRAFT" HOSE CLAMP 1-piece stainless steel housing and band in precision engineered Interlocked construction. Stainless steel Carbon steel screws 1/2" W Band Size : 3-1/16-4"

Visit Store Now !!

Detail Products

Detail Reviews

Jul 30, 2011 14:57:05

Super Heavy Duty Hi-Torque Clamp (Liner Series) HTM 300 L - 2-1/4'' - 3-1/8''

Super Heavy Duty Hi-Torque Clamp (Liner Series) HTM 300 L - 2-1/4'' - 3-1/8'' Reviews

Other Picture

Super Heavy Duty Hi-Torque Clamp (Liner Series) HTM 300 L - 2-1/4'' - 3-1/8'' Feature

• Single-piece band is extended underneath the adjustment slots to protect silicone or other soft-surface materials.
• 4 times stronger than other clamps.
• Eliminates double and triple clamping.
• 100% stainless steel - greater corrion resistance.

Breeze HTM-300L Super Heavy-Duty Hi-Torque Clamp Effective Diameter Range: 2-1/4" - 3-1/8" (57mm-79mm), 5/8" (15.8mm) 300 Series Stainless Steel Band, 410 Stainless Steel 5/16" Hex Screw,

Visit Store Now !!

Detail Products

Detail Reviews

Jul 29, 2011 11:06:04

Aero-Seal Marine Grade Hose Clamps (Box of 10) 300 88 - 3-1/8''-6''

Aero-Seal Marine Grade Hose Clamps (Box of 10) 300 88 - 3-1/8''-6'' Reviews

Other Picture

Aero-Seal Marine Grade Hose Clamps (Box of 10) 300 88 - 3-1/8''-6'' Feature

• Marine grade, High-Corrosion Resistance.
• Original patented worm-gear clamp. 
•  Heavy-duty four piece Quadra-lock construction. 

Marine grade, High-Corrosion Resistance. Original patented worm-gear clamp. Heavy-duty four piece Quadra-lock construction. 

Visit Store Now !!

Detail Products

Detail Reviews

Jul 28, 2011 09:09:04

Spectre Hose End Dress Up Fitting 1 1/2" in Red

Spectre Hose End Dress Up Fitting 1 1/2" in Red Reviews

Other Picture

Spectre Hose End Dress Up Fitting 1 1/2" in Red Feature

• GIVES YOUR ENGINE COMPARTMENT HOSES A HIGH END PROFESSIONALY INSTALLED LOOK INSTANTLY
• PROVIDES AN - AN - FITTING LOOK AT A FRACTION OF THE COST

Hose End Finisher - Comes Complete with pre-Installed C-Clamp. Gives Your Cars Engine Compartment a Professionally Built Sharp Appearance Instantly With an AN Fittings Look Red Adonized Color 1 1/2" ID -24 AN Look

Visit Store Now !!

Detail Products

Detail Reviews

Jul 27, 2011 09:44:04

Power Seal Hose Clamps - Marine Grade (Box of 10) 128 - 5-5/8''-8-1/2''

Power Seal Hose Clamps - Marine Grade (Box of 10) 128 - 5-5/8''-8-1/2'' Reviews

Other Picture

Power Seal Hose Clamps - Marine Grade (Box of 10) 128 - 5-5/8''-8-1/2'' Feature

• Highly corrosion resistant for marine and underground use. 
• All 300 series stainless steel band, screw, saddle and housing.
•  Extra-strong, square knot interlocking construction won't pull apart. 
•  No spot welds to rust, corrode, or rupture. 
• Smooth underside - insures most effective seal possible.

The sealing pressure oriented design on Breeze Power-Seal clamps enables it to outperform other general purpose industrial clamps. Why? Because the band width to torque to sealing pressure properties of Breeze Power-Seal clamps are designed to give higher sealing pressure with lower applied torque. This is especially important in the lower, typical torque ranges achieved when a clamp is installed by hand with a screwdriver or nutdriver.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 26, 2011 12:31:06

10 Pack Breeze 200-96H Aero-Seal Industrial / Aircraft Hose Clamp Effective Diameter Range: 3-5/8" - 6-1/2" (92mm - 165mm)

10 Pack Breeze 200-96H Aero-Seal Industrial / Aircraft Hose Clamp Effective Diameter Range: 3-5/8" - 6-1/2" (92mm - 165mm) Reviews

Other Picture

10 Pack Breeze 200-96H Aero-Seal Industrial / Aircraft Hose Clamp Effective Diameter Range: 3-5/8" - 6-1/2" (92mm - 165mm) Feature

• 410 Stainless Steel Slotted Hex Screw
• 9/16" (14.2mm) Stainless Steel Band
• Original patented worm-gear clamp
• Heavy-duty four piece Quadra-Lock construction
• used for aircraft and heavy-duty industrial applications

100% Stainless Steel. For use in outdoor, fresh water and mildly corrosive applications. Stainless steel band, saddle and housing with stainless steel screw. The original stainless steel worm-drive clamp. Heavy-duty four piece QUADRA-LOCK construction enables far more tightening torque to be delivered to the band perforations. Used for aircraft and heavy-duty industrial applications.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 25, 2011 07:48:04

Grip 40 Pc Hose Clamp Assortment

Grip 40 Pc Hose Clamp Assortment Reviews

Other Picture

Grip 40 Pc Hose Clamp Assortment Feature

• Use for securing hoses in low or moderate pressure applications around the house, garage, or workshop
• Screw thread, worm gear type clamps are easy to install and reuseable
• Zinc plated to resist rust and corrosion

Grip 40 pc Hose Clamp Assortment

Visit Store Now !!

Detail Products

Detail Reviews

Jul 24, 2011 06:34:06

Aero-Seal Marine Grade Hose Clamps (Box of 10) 300 64 - 3-9/16''-4-1/2''

Aero-Seal Marine Grade Hose Clamps (Box of 10) 300 64 - 3-9/16''-4-1/2'' Reviews

Other Picture

Aero-Seal Marine Grade Hose Clamps (Box of 10) 300 64 - 3-9/16''-4-1/2'' Feature

• Marine grade, High-Corrosion Resistance.
• Original patented worm-gear clamp. 
•  Heavy-duty four piece Quadra-lock construction. 

Marine grade, High-Corrosion Resistance. Original patented worm-gear clamp. Heavy-duty four piece Quadra-lock construction. 

Visit Store Now !!

Detail Products

Detail Reviews

Jul 22, 2011 21:04:06

10 Pack Breeze 200-104H Aero-Seal Industrial / Aircraft Hose Clamp Effective Diameter Range: 4-1/8" - 7" (105mm - 178mm)

10 Pack Breeze 200-104H Aero-Seal Industrial / Aircraft Hose Clamp Effective Diameter Range: 4-1/8" - 7" (105mm - 178mm) Reviews

Other Picture

10 Pack Breeze 200-104H Aero-Seal Industrial / Aircraft Hose Clamp Effective Diameter Range: 4-1/8" - 7" (105mm - 178mm) Feature

• 410 Stainless Steel Slotted Hex Screw
• 9/16" (14.2mm) Stainless Steel Band
• Original patented worm-gear clamp
• Heavy-duty four piece Quadra-Lock construction
• used for aircraft and heavy-duty industrial applications

100% Stainless Steel. For use in outdoor, fresh water and mildly corrosive applications. Stainless steel band, saddle and housing with stainless steel screw. The original stainless steel worm-drive clamp. Heavy-duty four piece QUADRA-LOCK construction enables far more tightening torque to be delivered to the band perforations. Used for aircraft and heavy-duty industrial applications.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 21, 2011 03:13:13

Power Seal Hose Clamps - Standard (Box of 10) 36 - 1-13/16''-2-3/4''

Power Seal Hose Clamps - Standard (Box of 10) 36 - 1-13/16''-2-3/4'' Reviews

Other Picture

Power Seal Hose Clamps - Standard (Box of 10) 36 - 1-13/16''-2-3/4'' Feature

• Use for standard clamp applications.
• Stainless steel band and housing with a carbon steel, carbon plated, slotted hex head screw. 
•  Extra-strong, square knot interlocking construction won't pull apart. 
•  No spot welds to rust, corrode, or rupture. 
• Smooth underside - insures most effective seal possible.

The sealing pressure oriented design on Breeze Power-Seal clamps enables it to outperform other general purpose industrial clamps. Why? Because the band width to torque to sealing pressure properties of Breeze Power-Seal clamps are designed to give higher sealing pressure with lower applied torque. This is especially important in the lower, typical torque ranges achieved when a clamp is installed by hand with a screwdriver or nutdriver.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 20, 2011 07:18:04

Extended Range Hi-Torque Hose Clamp HP 5 - 6-1/8'' - 9-1/8''

Extended Range Hi-Torque Hose Clamp HP 5 - 6-1/8'' - 9-1/8'' Reviews

Other Picture

Extended Range Hi-Torque Hose Clamp HP 5 - 6-1/8'' - 9-1/8'' Feature

• Highest strength worm-drive clamps made.
• 4 times stronger than other clamps.
• Eliminates double and triple clamping.
• 100% stainless steel - greater corrion resistance.

Breeze HP-5 Extended Range Hi-Torque Clamp Effective Diameter Range: 6-1/8" - 9-1/8" (156mm-232mm), 5/8" (15.8mm) 300 Series Stainless Steel Band, 410 Stainless Steel 5/16" Hex Screw,

Visit Store Now !!

Detail Products

Detail Reviews

Jul 19, 2011 03:47:05

Power Seal Hose Clamps - Standard (Box of 10) 104 - 4-1/8''-7''

Power Seal Hose Clamps - Standard (Box of 10) 104 - 4-1/8''-7'' Reviews

Other Picture

Power Seal Hose Clamps - Standard (Box of 10) 104 - 4-1/8''-7'' Feature

• Use for standard clamp applications.
• Stainless steel band and housing with a carbon steel, carbon plated, slotted hex head screw. 
•  Extra-strong, square knot interlocking construction won't pull apart. 
•  No spot welds to rust, corrode, or rupture. 
• Smooth underside - insures most effective seal possible.

The sealing pressure oriented design on Breeze Power-Seal clamps enables it to outperform other general purpose industrial clamps. Why? Because the band width to torque to sealing pressure properties of Breeze Power-Seal clamps are designed to give higher sealing pressure with lower applied torque. This is especially important in the lower, typical torque ranges achieved when a clamp is installed by hand with a screwdriver or nutdriver.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 17, 2011 16:36:04

Super Heavy Duty Hi-Torque Hose Clamp HTM 650 - 5-3/4'' - 6-5/8''

Super Heavy Duty Hi-Torque Hose Clamp HTM 650 - 5-3/4'' - 6-5/8'' Reviews

Other Picture

Super Heavy Duty Hi-Torque Hose Clamp HTM 650 - 5-3/4'' - 6-5/8'' Feature

• Highest strength worm-drive clamps made.
• 4 times stronger than other clamps.
• Eliminates double and triple clamping.
• 100% stainless steel - greater corrion resistance.

Breeze HTM-650 Super Heavy-Duty Hi-Torque Clamp Effective Diameter Range: 5-3/4" - 6-5/8" (146mm-168mm), 5/8" (15.8mm) 300 Series Stainless Steel Band, 410 Stainless Steel 5/16" Hex Screw,

Visit Store Now !!

Detail Products

Detail Reviews

Jul 16, 2011 18:29:04

10 Pack Breeze CT-9412 Aero-Seal Constant Torque Liner Clamp with Stainless Screw Effective Diameter Range: 11/16" - 1-1/4" (17mm - 32mm)

10 Pack Breeze CT-9412 Aero-Seal Constant Torque Liner Clamp with Stainless Screw Effective Diameter Range: 11/16" - 1-1/4" (17mm - 32mm) Reviews

Other Picture

10 Pack Breeze CT-9412 Aero-Seal Constant Torque Liner Clamp with Stainless Screw Effective Diameter Range: 11/16" - 1-1/4" (17mm - 32mm) Feature

• Torque Rated 30-70 in/lbs
• Stainless Steel Hex Screw, Spring and 9/16" (14mm) Stainless Steel Band
• Patented, pressure compensating clamping system
• Designed to self adjust to thermal expansion and contraction
• Custom designed Stainless steel Belleville springs. Heavy duty construction stops fluid leaks

Breeze "Constant-Torque" Clamping System is an active pressure-compensating clamp. Designed to self adjust to thermal expansion and contraction. Custom designed stainless steel Belleville springs. Virtually all rubber hose compresses "cold flow" after installation of a clamping device, resulting in an almost immediate torque loss that can exceed 80% of installation torque. Similarly, virtually all metal connections expand as a system heats up, and then contracts as the system cools. Conventional worm-gear, T-Bolt, and other clamps are passive, in that expansion and contraction of components cannot be compensated for without retightening or loosening the clamps. This Breeze clamping system is an "active" clamp mechanism, which monitors and then compensates for the temperature changes by actually changing diameter through a unique worm-gear Belleville assembly. Quadra-lock construction - housing orbitally riveted to saddle at 4 points providing extra strength. Liner protects soft or silicone hose from damage, extrusion or shear. Eliminates the sometimes necessary replacement of expensive "single use" clamps during routine or emergency maintenance. Fleet standard - easily installed, easily replaced in the field. Energy store in compressed Belleville springs controls automatic clamp adjustment. Torque Check - permits visual assurance that the clamp is properly installed. Stainless steel -- virtually unlimited product life - won't rust or corrode and is reuseable.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 15, 2011 20:36:07

Liner Hose Clamps (Box of 10) 40 - 2-1/16''-3'' Plated Carbon Steel

Liner Hose Clamps (Box of 10) 40 - 2-1/16''-3'' Plated Carbon Steel Reviews

Other Picture

Liner Hose Clamps (Box of 10) 40 - 2-1/16''-3'' Plated Carbon Steel Feature

• To protect the hose from extrusion and shear, we extend an inner liner to cover the worm-gear slots.
• These inner liners are integral extensions of the band, not separate welded or riveted extensions that won't lie true to the clamping axis.
• There are no bumps under the housing to jeopardize the concentricity of the seal, and no laminated coverings to disintegrate under heat, ultraviolet, chemical or corrosive attacks. 
• Breeze Aero-Seal liner clamps are designed with Quadra-Lock construction which enables more tightening torque to be delivered to the perforations while maximizing vibration resistance. 

There are four important things about silicone hose which have a direct effect on clamp selection; silicone hose is soft, hard to seal, expensive, and durable. Breeze liner clamps were developed to offset the first three and to compliment the durability. They afford maximum protection to silicone and other soft hoses while providing a true concentric seal.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 14, 2011 19:44:03

Grote Rubber Insulated Steel Clamps 84-8006

Grote Rubber Insulated Steel Clamps 84-8006 Reviews

Other Picture

Grote Rubber Insulated Steel Clamps 84-8006 Feature

• Rubber cushion for electrical insulation and vibration absorption
• Secures all forms of truck and trailer wiring, cable and hydraulic hoses
• Reduces vibration
• Zinc electroplated for added corrosion protection
• Cross to: Phillips 5-4516, Quick Cable 608638, Tectran 907R, Tectran 907RA

TECHNICAL SPECIFICATIONS- Pack Qty.: 10, Inside Diameter: 1", Color: Black, Width: 5/8", MtgHole: .375"

Visit Store Now !!

Detail Products

Detail Reviews

Jul 14, 2011 00:37:06